Overview Decanter centrifuge is a centrifugal sedimentation principle suspension was complete solid-liquid separation equipment. Decanter Centrifuge suspension of the use of solid-liquid proportion of poor, resulting in a strong centrifugal force field after the operation, the solid phase is settling under the influence of centrifugal force, in order to achieve solid-liquid separation. The principle is that when the inner materials into high-speed rotation of the centrifuge drum, due to the centrifugal force by the sample sizes, the suspension of large particles are subjected to greater centrifugal force is sinking to the drum wall and with the drum in the same direction But the inner rotor rotating helical blades slip existence of the pusher to push fluid discharge port to achieve varying degrees of solid-liquid separation process. Second, the structural characteristics and uses: Decanter centrifuge is mainly used for solid-liquid phase has a solid difference in specific gravity of the suspension phase dehydration, liquid clarification, particle size fractionation, concentration and other processes. The company's Decanter centrifuges large capacity, small footprint, continuous operation and low operating costs. With high efficiency, high dry. Environmental protection and other advantages. Its materials adaptable, by changing the helix within various structures and technical parameters, separating smaller particles and so can adapt to difficult to separate the materials. Outer drum barrel auger three inner rotor conditions of use of the company's Decanter centrifuges auger, the structure based on the separation requirements of different materials, is divided into various forms, has its unique of place. External drum structure with large aspect ratio, which can meet the separation, but also to achieve the purpose of processing capacity of 0.3 to 30% solids particle size 0.005 ~ 5mm, the temperature at 0 ℃ ~ 100 ℃, solid-liquid gravity concentration isolated suspension difference ≥0.05g / cm3 can be selected in this series of centrifuges. Technical indicators centrifuge can be achieved: a solid recovery: -99%; the cake moisture content :( municipal sludge) ≤75%; noise:. ≤85dB (A) ceramic sleeve, carbide sleeve, alloy block and outside the drum wear parts by insert carbide ceramic sleeve or sleeve, wear-resistant alloy welding block, improve the wear resistance, increase service life. Technical features: △: single large capacity, smooth operation, less energy saving footprint. △: involute planetary gear differential, transmission ratio, high accuracy. △: main bearings are imported bearings, high reliability and long operational life. △: Machine equipped with multiple safety overload protection device to ensure safety and reliability. △: Machine equipped common type and explosion-proof electrical control system to adapt to different conditions occasions. △: contact with the materials are made of stainless steel materials unit, important parts are forged. △: inside and outside of the drum cone angle and a large multi-aspect ratio structure to ensure that the processing capacity, the material dry. △: slag hole and screw pusher surface using carbide hardfacing material for processing, wear resistance. △: structural parts and whole racks are strictly to eliminate the stress treatment, high reliability without distortion. △: stent may need to design a low center of gravity style, high scaffolding, mobile work place according to the user. △: double rotor balancing strict accordance with national standards, testing and operation of the hard support balancing balancing test. △: according to actual needs can be equipped with single frequency, dual frequency, and PLC intelligent automatic power control system. NOTE: The above is the overall technical features, specific parameters can be separated according to material characteristics of the user's discretion, and depending on use conditions.